DOWNLOADS
Product PDF
Spec Sheet PDF
CAD DrawingCAD Drawing 2CAD Drawing 3
Accumulator Tank
The use of an accumulator tank is recommended to ensure effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. Less wear and tear on the pump with fewer starts and stops. Pre-pressurized at 0.8 bar / 12 psi.
Volume: 2L/0.5gal
Port connections: 1/2" hose
Height: 315mm/12.4"
Diameter; 160mm/6.3"
Weight: 1.2kg /2.7lbs
Product : JOHNSON PUMP ACCUMULATOR TANK 1/2" HOSE BARB
Manufacturer : JOHNSON PUMP
Manufacturer Part No : 09-46839-01
UPC : 7330717001322
The use of an accumulator tank is recommended to ensure effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. Less wear and tear on the pump with fewer starts and stops. Pre-pressurized at 0.8 bar / 12 psi.
Volume: 2L/0.5gal
Port connections: 1/2" hose
Height: 315mm/12.4"
Diameter; 160mm/6.3"
Weight: 1.2kg /2.7lbs
Product : JOHNSON PUMP ACCUMULATOR TANK 1/2" HOSE BARB
Manufacturer : JOHNSON PUMP
Manufacturer Part No : 09-46839-01
UPC : 7330717001322
