The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Jl Audio M6 8in Subwoofer With White Luxe Grille Infinite Baffle

Jl Audio M6 8in Subwoofer With White Luxe Grille Infinite Baffle

No reviews yet Write a Review
$449.99
SKU:
WTJLA0100350800
UPC:
699440937191
Weight:
10.46 LBS
DOWNLOADS
Product PDF
Spec Sheet PDF
CAD Drawing
CAD Drawing 2
CAD Drawing 3

JL Audio M6 8in Subwoofer with White Luxe Grille Infinite Baffle

93719

Model: M6-8IB-L-GwGw-4

M6 8-inch Marine Subwoofer for Infinite-Baffle Use (200 W, 4 ohms) - White Trim Ring, White Luxe Grille

With appropriate system setup, the addition of a subwoofer frees your smaller main speakers from the burden of reproducing low frequencies. This allows your whole system to play louder and to sound cleaner at all listening levels.

M6 Luxe subwoofers are outfitted with a low-profile mounting bezel and a fine mesh grille for minimal protrusion into cabin space. The result is a clean, visual appearance complementary of the finest marine vessel surroundings.

Engineered to operate without a dedicated enclosure, M6 infinite-baffle woofers feature a DMA-optimized, long excursion design and rugged suspension systems to generate smooth, powerful bass that will transform your boat’s audio system.

The M6-8IB is best used with amplifier power in the 50W - 200W range and is optimized to operate with a large volume of air behind it (at least 1.5 cu. ft. / 42.5 l). If you prefer to use a dedicated enclosure, refer to one of the suggested designs located in the Specifications section for optimum performance.

Like all JL Audio marine speakers, this driver is built to withstand a real saltwater marine environment and deliver years of listening enjoyment.

Production of all M6 loudspeakers takes place in JL Audio’s Miramar, Florida factory, using global components and materials.

Sold individually.

USA Limited Warranty: Two (2) years from the original date of purchase.

Specifications
General Specifications
Continuous Power Handling (RMS) 200 W
Nominal Impedance (Znom)4 ohms
Physical Specifications
Nominal Diameter 8.0 in / 200 mm
Overall Diameter10.25 in / 260 mm
Bolt Hole Circle Diameter9.27 in / 235 mm
Frontal Grille Protrusion 0.48 in / 12 mm
Mounting Hole Diameter8.625 in / 219 mm
Mounting Depth6.30 in / 160 mm
Driver Displacement 0.073 cu ft / 2.07 L
Net Weight8.70 lb / 3.90 kg
Parameters
Free Air Resonance (Fs)54.92 Hz
Electrical "Q" (Qes) 0.852
Mechanical "Q" (Qms) 10.314
Total Speaker "Q" (Qts)0.787
Equivalent Compliance (Vas)0.54 cu ft / 15.29 L
One-Way Linear Excursion (Xmax)*0.53 in / 14 mm
Reference Efficiency (no)0.28%
Efficiency (1 W / 1 m)**86.8 dB SPL
Effective Piston Area (Sd) 35.15 sq in / 0.0227 sq m
DC Resistance (Re)2.993 ohms
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is "louder".