DOWNLOADS
Product PDF
Spec Sheet PDF
CAD DrawingCAD Drawing 2CAD Drawing 3
DC 105 CFM Flangemount 3" Blowers
Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.
Features:
Product : JABSCO 3" FLANGEMOUNT BLOWER 12V 105 CFM
Manufacturer : JABSCO
Manufacturer Part No : 35115-0020
UPC : 671880029735
Jabsco blowers are primarily intended for intermittent duty cycles such as evacuating fuel vapors from bilge areas. If desired, they also may be used for other general air circulation applications with longer duty cycles. However, when doing so, it should be noted that the maximum motor life is approximately 1000 hours. Therefore, the blower should only be used for applications if this length of service is acceptable.
Features:
- Tough Reinforced Plastic Housing
- Mount to any surface
- Slip-On Inlet and Outlet Ducting Connection
- Efficient High Volume Air Flow
- Low Current Draw
- Corrosion-Resistant Materials Throughout
- N.M.M.A. Type Accepted
- Meets USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection
- Complies with ISO 9097 MARINE
Product : JABSCO 3" FLANGEMOUNT BLOWER 12V 105 CFM
Manufacturer : JABSCO
Manufacturer Part No : 35115-0020
UPC : 671880029735
