The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Xantrex Xplore Battery 120 Amp 6 Bank 12v Charger

Xantrex Xplore Battery 120 Amp 6 Bank 12v Charger

No reviews yet Write a Review
$1,408.53
SKU:
WTXAN819012012
Weight:
20.50 LBS
DOWNLOADS
Product PDF
Spec Sheet PDF
CAD Drawing
CAD Drawing 2
CAD Drawing 3

Xantrex Xplore battery Charger 12v 120 Amp

Model: 819-0120-12
  • 6 Battery Banks and Dual-Chemistry Charging
  • Xantrex Lithium and Custom Battery Charging
  • NMEA 2000 Connectivity
  • Xantrex App Connectivity
  • Auto-ranging universal input voltage (80-265 Vac, 45-65 Hz)
  • Power Share: automatically reduces charging output to prevent nuisance tripping of the AC input breaker.
  • Quiet Mode: when enabled, the internal fan is turned off and the charger operates at a reduced output when quietness is needed.
  • Storage Mode: automatically refreshes your batteries once every several days of non-use to ensure optimal battery condition.
  • Dead Battery Charging: ability to charge a battery as low as 0V back to full-charge
  • Reverse battery polarity protection
  • Drip-proof design
  • Over and under-temperature protection
  • DC over-voltage protection
  • Battery overcharging protection

The XPLORE 120/12 battery charger is the largest and most powerful charger in the market today. The universal, auto-ranging AC input and 120 amps of output current ensures ultra-fast and reliable worldwide charging. With up to six output banks of simultaneous charging combined with the ability to charge two battery banks with differing chemistries, the XPLORE 120/12 eliminates the need to have separate single-chemistry chargers and minimizes installation and wiring costs for your house bank and engine bank.

It is also equipped with an easy-to-read front panel LED display for basic configuration and status information. Advanced monitoring and configuration is enabled by NMEA 2000 protocol or Xantrex app using the Xantrex BLE module.

Specifications
ELECTRICAL SPECIFICATIONS
Max Total BAT1-6 DC Output Current120A
Max Total BAT1-2 DC OutputCurrent 5 to 120A (selectable)
Max Total BAT3-6 DC OutputCurrent 5 to 40A (selectable)
DC Output Voltage12Vdc (nominal)
DC Output Connections6
AC Input Voltage (Auto Ranging)120Vac / 230Vac (nominal), 80 to 265 Vac
Power Factor at Full Charge Rate> 98%
Charging Modes3-Stage, 2-Stage, Constant Voltage
Supported Battery TypesAGM, FLD, GEL, Xantrex LFP, Custom
Equalization (FLD Battery Only)Yes
GENERAL SPECIFICATIONS
Operating Temperature4 to 140 F (-20 to 60 C), with output derated above 122 F (50°C)
Storage Temperature40 to 176 F (-40 to 80 C)
Operating Humidity5 to 95% RH, non-condensing
AC Input Terminal Connection3-position tool-free spring clamp terminal
DC Output Terminal ConnectionBAT1-2: Two M6 stud terminals
L x W x H Charger16.26in (413mm) x 12.34in (312mm) x 6.5in (165mm)
Ingress Protection (IP) Rating Charger:IP-32 (vertical)
REGULATORY APPROVALS
SafetyETL listed to CSA C22.2 No. 107.2, conforms to UL Std. UL1236 (with Marine Supplement)
EMC47 CFR (FCC) Part 15B, Class B and CAN ICES-3(B) / NMB-3(B)
Ignition ProtectionSAE J1171, ABYC C-1500

What's in the Box:
  • XPLORE Charger unit
  • Xantrex BLE Module (PN: 808-0889)
  • Owner's Guide and extra labels