The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Jl Audio Mhd Marine Amplifier 4-channel Full-range 600 Watts 12v

Jl Audio Mhd Marine Amplifier 4-channel Full-range 600 Watts 12v

No reviews yet Write a Review
$1,349.99
SKU:
WTJLA0100331900
UPC:
699440982245
Weight:
8.40 LBS
DOWNLOADS
Product PDF
Spec Sheet PDF
CAD Drawing
CAD Drawing 2
CAD Drawing 3

JL Audio MHD Marine Amplifier 4-Channel Full-Range 600 Watts 12v

98224

Model: MHD600/4

4-Channel Class D Marine Full-Range Amplifier, 150 W x 4 @ 1.5-4 ohms

This compact, multi-channel powerhouse employs our Single-Cycle Control switching design and R.I.P.S. technology to deliver 150 W x 4 or 300 W x 2. Tight power supply regulation keeps distortion down and maximizes sound quality.

When using the MHD750/1 to drive a subwoofer system, the MHD600/4 is the ideal satellite amplifier, delivering huge dynamics with pristine resolution. It can also be deployed, on its own, as a very capable 3-channel system amplifier with 150W x 2 to the satellites and 300W x 1 to a subwoofer system.

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

USA Limited Warranty: Two (2) years from the original date of purchase

Specifications
Rated Continuous (RMS) Power @ 14.4 V
@ 4 ohms150 W RMS x 4
@ 3 ohms 150 W RMS x 4
@ 2 ohms150 W RMS x 4
@ 1.5 ohms 150 W RMS x 4
Bridged @ 8 ohms300 W RMS x 2
Bridged @ 4 ohms300 W RMS x 2
Rated Continuous (RMS) Power @ 12.5 V
@ 4 ohms150 W RMS x 4
@ 3 ohms150 W RMS x 4
@ 2 ohms 150 W RMS x 4
@ 1.5 ohms150 W RMS x 4
Bridged @ 8 ohms 300 W RMS x 2
Bridged @ 4 ohms 300 W RMS x 2
General Specifications
Frequency Response6 Hz - 30 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power>88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 ohms>300 / 50 Hz
Damping Factor @ 2 ohms>150 / 50 Hz
THD+N @ Rated Power<0.03% @ 4 ohms per Ch.
Input Voltage Range @ RCA InputsSwitchable from 200 mV - 2 V RMS to 800 mV - 8 V RMS
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating50 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s) Low-Pass or High-Pass
Filter Slope(s)12/24 dB/octave
Filter Frequency Range50 Hz - 500 Hz
Detented, Calibrated Filter Freq. PotentiometersYes
Filter Defeat Function Yes
Remote Level ControlOptional (HD-RLC)
Remote Level Modes2 or All Channels
Channel Input Mode SwitchYes (2/4 ch.)
Pass-Through Preamp OutputBuffered
Source Channel Selection for PreOutsYes
Physical Specifications
Height1.93 in / 49 mm
Width 10.74 in / 273 mm
Depth 7.85 in / 199 mm